Today the second chamber was finally finished. I’m not going to brick it in yet, since I have probably forgotten something important, and I want quick access if necessary, until the fire is actually lit. Unbricking an rebricking a door would be on my list of less than desirable ways to spend a day.
While the farther stack was packed with more vanilla type blended clay bodies, this front stack is mostly bodies composed entirely of native clay and stone. Some of it got white slip, but it all got the same clear glaze, so I don’t have to guess too much about temp in the rear chamber when I fire.
Below are some pics of brush deco, slip, and loading. I am happier with a lot of the brush work this time around, but some things still just give me fits, like trying to draw long fluid shrimp whiskers on a round pot. Gah! Need more practice…
I’ve just come off of a week of pot showing and selling, sharing space with some very fine young (and older) potters who are making crazy good work. This last week was Karatsu Yakimon Matsuri, which ran concurrently with Arita Touki-Ichi. This was the third year for the Karatsu event, and attendance jumped to 100,000, from 70,000 last year.
The theme was tableware, and there were many collaborative exhibits between potters and chefs. What a great time it was to see all of the wonderful work. Gave me a LOT of new ideas and inspiration, as well as some great feedback from customers and restaurant owners.
I had been scheduled to go to the Mungyeong Teabowl Festival, however the ferry accident resulted in most or all of the spring holiday’s festivals being cancelled or postponed.
Lately I’ve been experimenting with ways to age pots more quickly, making the crackle stand out. This time I tried an old woodworking trick, and it seems to work nicely.
I soaked the pots in a strong tea bath then dried completely. After that, I applied iron acetate with a brush and let them sit a couple of days. The iron acetate reacts with tannins and turns a dark color within about 3 days. I made the iron acetate by soaking steel wool in vinegar. I may change to a weak sulfuric acid solution, since the smell of the vinegar is proving difficult to get out of the pots!
All of these pots were made with clay from the property, discovered right under where we built the kiln. It has a lot of iron, but still takes some heat, and won’t bloat at higher temps. Probably due in part to the fact that it is very open with a lot of sand and other even larger inclusions. Even vitrified, it still sweats because of the openness. With use, the sweating stops, as all the pores fill with minerals from the water and tea tannins, etc…
Lately I’ve been spending all my potting time making large stuff for the next firing. It takes forever to dry, and I need extra time to bisque it all. Yup, all of it. No more cracked pieces because I glazed them raw and effed up.
So I was at a big drinking party the other night. My neighborhood mens group gets together bi-monthly to catch up and eat good stuff. A good custom overall. Anyway, the guy who hosted the party turned out to be a sake enthusiast as well, and while everyone else was drinking shochu (a hideous drink fit only for odd, uncivilized folk… just kidding….), he broke out a bottle of the local brewery’s best, and two very nice guinomi, one wide and shallow and one deep and tall. The hira-sakazuki (low, flat one) was a beautiful blackish red uber reduced surface, and made from really nice clay that contained quite a bit of iron, was fairly fine, and which was trimmed to perfection. The taller guinomi was Bizen Karatsu style, otherwise called yakishime. Neither were signed so I have no idea who made them.
The gorgeous hira-sakazuki inspired me to get back on the wheel and start making smaller work for the next firing. I started with hira-sakazuki and finished with Karatsu style tea bowls. It was nice to be back in the saddle, and the clay, which came out of the ground near my house, was beautiful to work with now that it has aged a few months since I processed and pugged it.
I ended up spending more time than I wanted on each of these, forcing myself to slow down the wheel and throw slowly, with as little motion as possible. I wanted these simple shapes to remain simple and not look too refined. One of the buzzwords for Karatsu ware is ‘Soboku’ 素朴, which roughly translates as ‘rustic’. Too much handling and you lose that quality. Spent all of that time processing local clay, it would be a shame to waste it by over-handling it. All of these pots will get a thin to medium coat of 90%spar and 10%ash. Maybe a couple of the sake cups will get a thin coat of iron and ash.
This last wood kiln firing was a real disaster. All of my large pieces cracked or collapsed completely, and all of the smaller work ended up under-fired badly. The upside to this is that they can all be refired, and I just finished the 2nd of 3 refire loads in the gas kiln this morning.
From the first refire load, my favorite pot is a porcelain teabowl glazed with rice straw ash glaze. I don’t normally work in porcelain, but in my search for bodies that vitrify a little better than the local clays, I’ve started using partly or mostly porcelain in some of my work. This particular bowl is porcelain with as much feldspar sandstone mixed in as I could manage, and still have it wedge-able.
In the wood firing it was in a spot that got a lot of fly ash, and in fact a lot of flaky ash collected inside the bowl. Making sure not to dump this, I saved it for the gas kiln and fired it to cone 11 flat. All of that ash melted really nicely, mixing with the rice straw ash glaze for some nice color.
There are several bloats on the interior, but none really fragile or severe. These bloats and the blues and greens on the interior really remind me of some the old Karatsu bowls with their warty bloated surfaces and subtle coloring of fly ash on rice straw ash glaze. Another nice thing about this pot: the fire color from the wood kiln was not lost in the gas firing. There is a nice gold luster on the melted surface of the bare porcelain body.