Mystery Solved

The last firing of the wood kiln, I mixed up a glaze of 65 mystery wood ash and 35 Amakusa porcelain stone. I expected a dark green or yellow glassy ash glaze that didn’t run much. I even had the test tiles from around 5 years ago that showed what I’d get.

Well, I ended up getting a rust red sintered crust on every pot I put that glaze on, and it was a lot of pots. Even in areas that got up to cone 13, that glaze did not melt. It was very confusing since I had the test tiles showing a green glossy glaze.

With the new tiny kiln, I was able to fire twice today, 2 sets of test tiles. One set using the mystery wood ash from the crusty rust refractory debacle, and the other set using my normal mixed wood ash. Each set was fired for 90 minutes to cone 9 (yep, just 90 minutes to cone 9!) and all the recipes were exactly the same save for the type of ash.

I think it is safe to say that these ashes are not interchangeable. The mystery ash was from a neighbor’s wood stove, and I have no idea what it was. At any rate, it seems to have been reduced to almost pure silica. Sure enough, the glazes with the regular mixed wood ash turned out as expected. The atmosphere in the tiny test kiln is interesting. The 80/40 test tile came out reduced while the others were oxidized, only 2-3cm apart in either direction.

So, in short, mystery solved, and it didn’t require waiting for a big kiln firing. All in all, this tiny kiln is turning out to be very useful indeed, and easy to fire.