Kiln Loading

The date for the fall firing is official! 2011/11/11. There must be some sort of astrological significance to this, be it good or bad.

Since I’ve been making a lot or work to go into the kiln for this firing, I’ve been constantly short on ware boards, so decided the best way to free some up would be to get the pots off of them by loading them into the kiln. This has the added benefit of breaking up the loading process so it is not so danged exhausting.

This afternoon saw the completion of the rear setting, all cone 6 ware give or take. E-Karatsu, Kawakujira, and Kohiki. Most everything is smaller and doesn’t have much height, so to fill in the higher spaces many of the pots were balanced on kiln posts. The added benefit to this is that if the temperature gets too high, the pots will collapse, invert around the posts and stick to them completely and utterly. Post-In-A-Cup.

The two jars are refires that had a lot of unmelted ash on the shoulders. In order to melt it, I’ve applied an ash glaze that should melt and flux the sintered ash underneath, hopefully. And, if I’m really lucky, they will slump or split in the firing, sticking to everything around them.

2 thoughts on “Kiln Loading”

Comments are closed.